Surface Convert Sections (6.0)

Civil/Survey and GIS add-on for CAD engines.
twdotson
Site Admin
Posts: 218
Joined: Thu Mar 19, 2015 9:35 pm
Location: Flemingsburg, KY

Surface Convert Sections (6.0)

Postby twdotson » Sat Oct 17, 2015 8:53 pm

Converts cross sections to plan view 3dPolys along an alignment. Requires a centerline alignment and sections (as polylines). All the polylines used to create a surface must be in one layer. For example if a EG/FG scenario exists, all the existing ground section polylines must be in one layer (example EG) while all finished ground polylines reside in another (example FG).

Image

waov1972
Posts: 5
Joined: Fri Nov 11, 2016 9:38 pm
Location: ECUADOR

Re: Surface Convert Sections (6.0)

Postby waov1972 » Sat Nov 12, 2016 12:50 am

Hello,
WHERE TO DOWNLOAD THE USER MANUAL TO START THE STUDY OF THIS SOFTWARE.
THANK YOU

twdotson
Site Admin
Posts: 218
Joined: Thu Mar 19, 2015 9:35 pm
Location: Flemingsburg, KY

Re: Surface Convert Sections (6.0)

Postby twdotson » Mon Nov 14, 2016 5:39 pm

The users guide is installed with the software and can be accessed from it's menus.

waov1972
Posts: 5
Joined: Fri Nov 11, 2016 9:38 pm
Location: ECUADOR

Re: Surface Convert Sections (6.0)

Postby waov1972 » Tue Feb 07, 2017 6:57 pm

I am a user and the menus are a bit simple ... I need a video tutorial or a drawing ... Can you help me? regards

twdotson
Site Admin
Posts: 218
Joined: Thu Mar 19, 2015 9:35 pm
Location: Flemingsburg, KY

Re: Surface Convert Sections (6.0)

Postby twdotson » Mon Feb 13, 2017 11:07 pm

I have attached the drawing that is shown in the picture. First make sure you have an alignment and properly prepared sections. The alignment polyline must be assigned a name using Alignments > Tag Info. Otherwise the minimum requirement is an MTEXT object at the horizontal center of the section polyline(s). This mtext label must contain two numbers (one over top the other) that is the station (distance along) and the elevation (at that point in the section).

You can then optionally have TEXT objects along the section to identify breaks that you want connected. In the example there are four text labels (EP1L, EP1R, EP2L, EP2R) and they form four 3dpolys in plan view when done. Use only (1) MTEXT object for the center, as many TEXT as needed.

Be sure to spread your sections out if they are close together, otherwise problems can occur. If you have specific questions, reply here or email me.
Attachments
SurCnvSec1.dwg
(339.59 KiB) Downloaded 5163 times

waov1972
Posts: 5
Joined: Fri Nov 11, 2016 9:38 pm
Location: ECUADOR

Re: Surface Convert Sections (6.0)

Postby waov1972 » Sun May 14, 2017 8:02 pm


twdotson
Site Admin
Posts: 218
Joined: Thu Mar 19, 2015 9:35 pm
Location: Flemingsburg, KY

Re: Surface Convert Sections (6.0)

Postby twdotson » Tue May 23, 2017 4:59 pm

Sorry that looks like it requires a Google login, and I'm afraid we don't understand Spanish.


Return to “MapWorks”

Who is online

Users browsing this forum: No registered users and 1 guest

cron