The Build Thread (10.0)

Productivity Tools for Civil3D 2015 or higher
twdotson
Site Admin
Posts: 218
Joined: Thu Mar 19, 2015 9:35 pm
Location: Flemingsburg, KY

The Build Thread (10.0)

Postby twdotson » Tue Jan 18, 2022 4:37 pm

This post/thread is for minor revisions and major new tools added to C3DTools.

  • (04-02-21) Point Snap, added Sample option to snap points to adjacent section sample lines.
  • (04-03-21) Mass Points, added options to output TinSurface and GridSurface files.
  • (04-11-21) Map Import, overhauled GML driver for better geometry and data import.
  • (04-18-21) Section Sample Lidar, improved results by sectioning structures with vertical drop.
  • (04-23-21) Mass Points, added option to generate GridSurface direct to drawing.
  • (05-02-21) Section Sample, added northing and easting to reported columns.
  • (05-19-21) Object/Entity Data Labels, uses a template to label extended information of polylines, etc.
  • (05-22-21) Point Group Cmd, added Highlight option, builds selection of points in matching groups.
  • (05-25-21) Object data tools, enhanced all tools to support optional standard xdata use.
  • (06-18-21) Surface MassPoints, added option for post processing to create Tin database.
  • (06-23-21) Surface Query Database, extracts results content from a pre-processed Tin database.
  • (06-26-21) Surface MassPoints, filter distance [any] speed improved dozens of times faster.
  • (07-02-21) Surface Query Database, added additional options for Grids, exports.
  • (07-06-21) Surface MassPoints, filter distance [any] added 2D/3D distance option.
  • (07-08-21) Surface Tin Formats, added Leica Terrain Model (*.trm) currently read-only.
  • (07-26-21) Section SampleExtend extends/trims SampleLines based on various options.
  • (08-06-21) Point Convert Explode, converts by temporarily exploding objects and obtaining properties.
  • (08-13-21) Network Convert, converts linear geometry with object data to pipe networks.
  • (08-20-21) Surface E00 Grid format read driver rewritten for increased speed, stability.
  • (08-20-21) Profile File Export, export to CSV or DWG/DXF for Slide2 and SlopeW stability apps.
  • (09-14-21) Figure Label Info improved with local low, high flags, minimum length limiter.
  • (09-28-21) EPA SWMM Surface, Generates surfaces from z values in EPS SWMM Report file.
  • (10-04-21) Section View Resize, resize section views with new offsets and elevation values.
  • (11-10-21) Added TinSurface File Format ESRI ADF TinSurface (tdenv.adf) in read mode.
  • (11-21-21) Parcel Deed Entry, added numerous curve creation methods.
  • (11-27-21) LIdar Scale/Rotate, optionally scales and rotates a Lidar file based on parameters.
  • (01-04-22) Object Data Contained, added support for slope arrows, averaged and pushed into data.
  • (01-17-22) Figure Label Information improved with toggle for xref labels on/off.

With each revision, the build has been revised. Existing users should run Check for Updates (or download again and reinstall).

Return to “C3D Tools Suite”

Who is online

Users browsing this forum: No registered users and 1 guest

cron