Featureline - Stair Step Calculator

Productivity Tools for Civil3D 2015 or higher
Lincoln
Posts: 83
Joined: Tue Apr 07, 2015 6:27 pm

Featureline - Stair Step Calculator

Postby Lincoln » Thu Sep 03, 2020 5:45 pm

We need a routine that can create a featureline with step heights that fall within a user supplied range. This would typically be a range of 4" - 7" to conform to building codes.

Building code requires:

-the individual step heights not vary in the stair system by more than some tolerance amount.
-the tread depths be some minimum depth (i.e., 11")

The photos below show the bottom and top step elevations to calculate between. Note that the treads may be the minimum depth on tight situations, or span several feet on long walk approaches..
Attachments
Capture2.JPG
Capture2.JPG (65.57 KiB) Viewed 1981 times
Capture.JPG
Capture.JPG (56.64 KiB) Viewed 1981 times

Lincoln
Posts: 83
Joined: Tue Apr 07, 2015 6:27 pm

Re: Featureline - Stair Step Calculator

Postby Lincoln » Thu Sep 03, 2020 6:56 pm

More steps..
Attachments
Capture2.JPG
Capture2.JPG (101.03 KiB) Viewed 1979 times
Capture.JPG
Capture.JPG (131.22 KiB) Viewed 1979 times


Return to “C3D Tools Suite”

Who is online

Users browsing this forum: No registered users and 1 guest

cron