Alignment Point Station/Offset (7.0>8.0)

Productivity Tools for Civil3D 2015 or higher
twdotson
Site Admin
Posts: 190
Joined: Thu Mar 19, 2015 9:35 pm
Location: Flemingsburg, KY

Alignment Point Station/Offset (7.0>8.0)

Postby twdotson » Wed Nov 14, 2018 5:59 pm

Creates dynamically updated point UDP (user defined properties) on CogoPoints showing alignment station & offset.

Image

Command: AliPntUdp

Procedure:

  1. Open the drawing containing the alignment and points.
  2. Initiate this tool from the menu, ribbon or command above.
  3. Select the alignment by picking it in the drawing.
  4. Choose a point selection method (such as drawing) and select CogoPoints to process.

At this point the UDP has been assigned to the CogoPoints, you can review the information in the PROPS dialog (bottom) by clicking one point. While you can change it, it's not recommended.

Point Label Style

Most users will want to display the station/offset on the point, this requires a quick modification to the point label style.

  1. In the Toolspace panel, choose the Settings tab.
  2. Expand the Point category by clicking the [+].
  3. Expand the Label Styles section.
  4. Click the Label Style you use to select it, then right click and choose Edit.
  5. On the Layout tab, set the Component Name to "Point Description"
  6. In the Text section click the second column of the Contents row, then click [...]
  7. In the right pane of the dialog, click the end of "<[Full Description(CP)]>" and press enter for a new line.
  8. In the Properties tab, choose "Station" in the dropdown, then click the adjacent right arrow [>].
  9. In the right pane of the dialog, click the end of "<[Station(CP)]>" and press enter for a new line.
  10. In the Properties tab, choose "Offset" in the dropdown, then click the adjacent right arrow [>].
  11. Click [OK] twice to return to the editor, the points should now display the station/offset.

This appends the station/offset information under the point description, there may be other ways to display the fields if you need them in different positions.

Point Table Inclusion

  1. Initiate the Point Table Creation tool.
  2. Choose the table style to modify, click [OK].
  3. Choose the pulldown to the right and choose “Edit Current Selection”
  4. In the [Data Properties] tab, click the [+] in the lower right.
  5. Use the horizontal scroll to scroll to see the column.
  6. Double click the Column Value cell, choose "Station", click [>], click OK.
  7. Double click the Column Header cell (right of Description), enter “Station” in the right pane, click OK.
  8. Repeat at step 4 for the "Offset" UDP values, then close the Table Style dialog.
  9. Click the “[+] No point groups selected” and select a group or "_All Points".
  10. Optionally reorder the columns by dragging them to the left.
  11. Click [OK] and pick a point for the table.

Note: If dynamic update is turned on, the UPD will change if a CogoPoint is moved in the drawing (by any command). This reflects on the label and even the table if it has been created. This can be turned off in the OPTIONS dialog, under the C3DTools tab.

twdotson
Site Admin
Posts: 190
Joined: Thu Mar 19, 2015 9:35 pm
Location: Flemingsburg, KY

Re: Alignment Point Station/Offset (7.0>8.0)

Postby twdotson » Wed Apr 17, 2019 7:03 pm

There has been a request to provide the station/offset values as doubles. The reason we chose strings initially is to allow for the "+" symbol in the station, and L/R at the end of the offset value (+/- were recently added). We cannot break compatibility with the existing users data, so the plan is to provide two new optional UDP doubles under the "C3DTools.Alignment" with the names "StaDbl" and "OfsDbl". Both sets (string/double) are now optional.

The code that fills in the values will check for these new names and fill in all four if they exist.

HansSMS
Posts: 1
Joined: Tue Apr 16, 2019 11:44 pm

Re: Alignment Point Station/Offset (7.0>8.0)

Postby HansSMS » Thu Apr 18, 2019 12:52 am

This is great, thanks.

Can use the Civil 3D formatting options to force a plus sign on the labels.

This also lets me easily export Station/offsets to spreadsheets to do further calcs with them.
Attachments
Station Offset Labels.JPG
Station Offset Labels.JPG (17.83 KiB) Viewed 151 times


Return to “C3D Tools Suite”

Who is online

Users browsing this forum: No registered users and 3 guests

cron