Surface Convert Sections

Surface Tools for Civil3D 2013 or higher
Site Admin
Posts: 176
Joined: Thu Mar 19, 2015 9:35 pm
Location: Flemingsburg, KY

Surface Convert Sections

Postby twdotson » Sat Oct 17, 2015 9:07 pm

Converts cross sections to plan view 3dPolys along an alignment. Requires a centerline alignment and sections (as polylines). All the polylines used to create a surface must be in one layer. For example if a EG/FG scenario exists, all the existing ground section polylines must be in one layer (example EG) while all finished ground polylines reside in another (example FG).


Return to “C3D Surface Tools”

Who is online

Users browsing this forum: No registered users and 1 guest