Search found 218 matches

Go to advanced search

by twdotson
Tue Apr 28, 2015 11:25 pm
Forum: MapWorks
Topic: Figure Grade Elevations
Replies: 17
Views: 48457

Re: Figure Grade Elevations

Well we should have tested on a closed figure, that was the problem. When you run Check for Updates in the morning, follow this procedure. 1) Set the surface to no display so you can pick FeatureLine? 2) Start the Figure Grade Elevations tool. 3) Select the FeatureLine (anywhere). 4) Enter P for Pla...
by twdotson
Tue Apr 28, 2015 10:39 pm
Forum: MapWorks
Topic: Figure Grade Elevations
Replies: 17
Views: 48457

Re: Figure Grade Elevations

Found the drawing at the email server quarantine level, sorry about that.
by twdotson
Tue Apr 28, 2015 7:36 pm
Forum: MapWorks
Topic: Figure Grade Elevations
Replies: 17
Views: 48457

Re: Figure Grade Elevations

The term Figure was used a long time before Civil3D used it as Survey Figures and the Figure tools in Gizmo3D are for any supported figure which can include 3dPolylines, etc. If you send me a drawing I will be able to test, debug and work up a set of instructions. Looking at JPGs has severe limitati...
by twdotson
Tue Apr 28, 2015 2:16 pm
Forum: MapWorks
Topic: Figure Grade Elevations
Replies: 17
Views: 48457

Re: Figure Grade Elevations

Have you tried using the tool with the Plane option, when prompted for the plane start, pick the rightmost A corner (which should already be at 100.0, then go up and right parallel to the centerline and pick one of two points which look to be at the same offset off center. Then specify your slope as...
by twdotson
Mon Apr 27, 2015 11:51 pm
Forum: MapWorks
Topic: Figure Grade Elevations
Replies: 17
Views: 48457

Re: Figure Grade Elevations

Added Plane method, explained in detail at this link.
by twdotson
Mon Apr 27, 2015 2:55 pm
Forum: MapWorks
Topic: Figure Grade Elevations
Replies: 17
Views: 48457

Re: Figure Grade Elevations

Added Project method, explained in detail at this link.
by twdotson
Sun Apr 26, 2015 12:09 am
Forum: MapWorks
Topic: Figure Grade Elevations
Replies: 17
Views: 48457

Figure Grade Elevations

Apply various grade methods to any portion of a single figure. Still in early development, the plan is to add various options, some will be stubs in the initial build. Any thoughts on other options reply here.
by twdotson
Sat Apr 25, 2015 8:35 pm
Forum: MapWorks
Topic: Point Transform (6.0)
Replies: 0
Views: 11190

Point Transform (6.0)

Performs rotation, scale and translate based on relationships between points.

Image
by twdotson
Thu Apr 23, 2015 4:45 pm
Forum: MapWorks
Topic: Alignment Station Revised (5.0)
Replies: 0
Views: 10690

Alignment Station Revised (5.0)

Add four template fields so that the begin, end, point of curvature and tangent labels can be controlled by the user.
by twdotson
Wed Apr 22, 2015 11:23 pm
Forum: C3D Tools Suite
Topic: Pond Design - Volume Too Small?
Replies: 5
Views: 20118

Re: Pond Design - Volume Too Small?

In the earliest stages the thought was straight offsets would do the job, so the plan was to offer a bottom-up or top-down approach. Then it turned out not to be so simple and the top down fell off the possibilities. A second tool will need to be produced and any previous comments will be on the old...

Go to advanced search

cron